Geekvape Q Replacement Pod

Geekvape

Geekvape Q Replacement Pod Cartridges

£6.99 £10.99 36% Off

Tax included. Shipping calculated at checkout.

Quantity
Resistance:
Order within Calculating...
For delivery Calculating...
In Stock!

In Stock!

Multibuy Deals

Multibuy Deals

Applies Automatically at Checkout.

Applies Automatically at Checkout.

Geekvape Q Replacement Pod Cartridges

£6.99 £10.99 36% Off
Geekvape Q Replacement Pod

What is the Geekvape Q Replacement Pod Cartridges?

The Geekvape Q Replacement Pod Cartridges are genuine Geekvape pods for the Q series, made for kits like the Geekvape Wenax Q 25W pod kit and the Geekvape Sonder Q pod kit. Each pack contains three 2ml pods, and every pod has a mesh coil built in.

You can choose from three resistances: 0.6 ohm, 0.8 ohm and 1.2 ohm. The 1.2 ohm pod gives a tight mouth-to-lung draw, the 0.8 ohm pod is a balanced everyday choice, and the 0.6 ohm pod gives a looser draw with more vapour.

Of all the Geekvape pods we stock, these Q cartridges are among the most popular, because they fit so many Geekvape Wenax and Sonder kits. At £6.99 for three, they are a simple way to keep your kit tasting fresh.

What E-Liquid Should I Use?

Avoid thick high VG shortfills, as they are too dense for these small pod coils and can cause dry or burnt hits.

Specifications

Feature Details
Product Name

Geekvape Q Replacement Pod Cartridges, available in a pack of three.
Pod Capacity

Each pod holds 2ml of e-liquid, meeting the UK TPD limit.
Coil Type

Built-in mesh coil in every pod.
0.6 Ohm Pod

Recommended wattage of 18W–25W for a restricted lung draw.
0.8 Ohm Pod

Recommended wattage of 12W–18W for MTL or RDL vaping.
1.2 Ohm Pod

Recommended wattage of 8W–12W for a tight MTL draw.
Filling System

Convenient top-fill design with a removable mouthpiece.
Connection

Magnetic connection for a secure fit in compatible Geekvape Q series kits.
Single Pod

Available individually through the Geekvape Q Pod Cartridge listing.
Compact Kit Compatibility

Also compatible with the Geekvape Wenax Q Mini Pod Kit.
Built-In Mesh Coil

Built-In Mesh Coil

Every pod has a mesh coil already fitted inside, so there is nothing to unscrew or replace. Mesh heats quickly and evenly across a wide surface, giving clean, full flavour and smooth vapour from the first puff until the pod wears out.

Three Resistance Choices

Three Resistance Choices

Pick the 1.2 ohm pod for a tight, cigarette-like pull, the 0.8 ohm pod for a balanced vape, or the 0.6 ohm pod for a looser draw with more cloud. All three fit the same Q series kits, so you can try each one and find your favourite.

Fits the Geekvape Wenax Range

Fits the Geekvape Wenax Range

These pods suit the Wenax Q, Wenax Q Mini and Geekvape Wenax Q Pro, along with the Sonder Q and Aegis Q. If you own more than one Geekvape Wenax kit, a single pack of Q pods can keep all of your devices vaping well every day.

Perfect for Nic Salts

Perfect for Nic Salts

The 1.2 ohm and 0.8 ohm pods work brilliantly with 20mg nic salts and popular flavours like Elf Bar Elfliq 10ml nic salt, giving a smooth hit at low power.

2ml Refillable Capacity

2ml Refillable Capacity

Each pod holds 2ml of e-liquid, which is the most allowed under UK rules. That gives you plenty of vaping time between refills, and because the pods are refillable, you can enjoy any nic salt or 50/50 flavour you like.

Easy Top-Fill Design

Easy Top-Fill Design

The mouthpiece lifts off to reveal a wide fill port, so topping up is quick and tidy. You do not need to take the pod apart or remove it from your kit, which makes refills easy at home, at work or when you are out.

What's in the Box?

  • 3 x Geekvape Q Replacement Pod Cartridges (2ml)
  • Resistance as selected: 0.6, 0.8 or 1.2 ohm

The pods come empty, so add your own e-liquid. Browse all replacement vape pods by brand, or check the clearance sale for bargains.

Pricing and Offers

  • Geekvape Q Replacement Pod Cartridges are just £6.99 per pack, down from £10.99
  • That is a 36% saving, and each pack of three works out at about £2.33 per pod
  • Buy 2 packs for £13, which works out at £6.50 per pack
  • Buy 3 packs for £18, which works out at £6.00 per pack, or £2.00 per pod
  • Buy 4 packs for £22, which works out at just £5.50 per pack
  • All resistances are the same price, so you can mix and match
  • Multi-buy savings are applied automatically at checkout
  • Save on kits, pods and e-liquid with our bundle deals
  • Find more multi-pod savings in our pack of 3 deals
  • For adult use only. Please vape responsibly and follow UK vaping rules

How to Use / How to Fill

1

Step 1

Remove the mouthpiece. Gently pull the mouthpiece off the top of the pod to reveal the fill port, keeping the pod upright.

2

Step 2

Fill the pod. Slowly add your favourite e-liquid down the side wall, stopping just below the top.

3

Step 3

Refit the mouthpiece. Push the mouthpiece firmly back into place until it sits flat to help prevent leaks.

4

Step 4

Let the coil soak. Wait at least two to three minutes to allow the cotton to absorb the e-liquid and help prevent a dry or burnt first puff.

5

Step 5

Click the pod in. Push the pod into your Q series kit until the magnets hold it securely in place.

6

Step 6

Set the wattage and vape. Start at the lower end of your pod's recommended wattage range, then gradually increase it to your preferred setting.

7

Important Note

UK TPD-compliant pods hold 2ml of e-liquid. Fill carefully and leave a small gap at the top.

Compatible Coils & Pods

Geekvape Q pods are widely listed as compatible with:

  • Geekvape Wenax Q, Wenax Q Mini and Wenax Q Pro
  • Geekvape Sonder Q and Sonder Q2
  • Geekvape Aegis Q and Digi Q

The 1.2 ohm pod may not suit every Q kit, so please check your device first. Find more options in our Geekvape replacement pods range, or see the Geekvape U replacement pods if you own a U series kit.

Who Is This For?

  • Geekvape Wenax and Sonder Q owners who need genuine pods.
  • Ex-smokers who want a tight MTL draw from the 1.2 ohm pod.
  • Nic salt vapers who want a reliable everyday pod.
  • Anyone who wants spare Geekvape pods ready to use.

Looking for a new kit? Browse our vape pod kits, and stock up on e-liquid with our nic salts pack of 10 range.

Pros

  • Built-in mesh coil gives clean flavour with no coil changes needed
  • Three resistances of 0.6, 0.8 and 1.2 ohm for MTL and RDL vaping
  • Fits the Wenax Q, Wenax Q Mini, Wenax Q Pro, Sonder Q and Aegis Q
  • Top-fill design and magnetic fit make refills and swaps very easy
  • 36% off the usual price, with extra savings on multi-buy packs

Cons

  • The coil cannot be changed, so the whole pod must be replaced
  • The 1.2 ohm pod may not suit every Q series kit, so check first
  • Not suited to thick high VG shortfills or big sub-ohm clouds

Need a new device as well? Browse our Geekvape vape kits, or save with the Geekvape Sonder Q kit and nic salt bundle.

Troubleshooting

Burnt Taste

The coil may not have soaked, or the pod ran low on e-liquid. Wait a few minutes after filling and refill before it runs dry.

Leaking Pod

The pod may be overfilled, or the mouthpiece is not pushed fully on. Fill just below the top and make sure the mouthpiece sits flat.

Device Not Firing

The contacts on the pod or device may be dirty or wet. Wipe them with a tissue, then click the pod back in firmly and try again.

Harsh Throat Hit

Your nicotine may be too strong for the pod. Try the 1.2 ohm pod, or pick a lower strength from our nic salts range.

Fading Flavour

The built-in coil has worn out and can no longer wick well. Fit a fresh pod, or try a smoother e-liquid like 5mg nic salts.

Frequently Asked Questions

Geekvape Q pods are widely listed for the Wenax Q, Wenax Q Mini, Wenax Q Pro, Sonder Q, Sonder Q2, Aegis Q and Digi Q. Please check your device manual before you order.

Yes, the Geekvape Wenax Q Pro is widely listed as using Geekvape Q pods. The 0.8 ohm pod is a popular choice for this kit, giving a balance of flavour and throat hit.

Yes, the Geekvape Wenax Q Mini uses Q series pods. Choose the 0.8 or 1.2 ohm pod for a smooth MTL draw with nic salts on this compact, pocket-friendly kit.

These pods fit the Wenax Q range listed above. If you own a newer model such as the Wenax Q2 or Wenax Q Ultra, please check your manual to confirm it uses Q series pods.

These Geekvape Q pods are top fill. You simply lift off the mouthpiece to reveal the fill port, add your e-liquid and push the mouthpiece back on, with no need to remove the pod.

To fill your Geekvape Sonder Q, take out the pod, lift off the mouthpiece and add e-liquid slowly down the side. Refit the mouthpiece and wait a few minutes before vaping.

It depends on how often you vape and your e-liquid. As a guide, a Geekvape Q pod usually lasts around one to two weeks, though sweet flavours can wear the coil out faster.

Choose 1.2 ohm for a tight MTL draw, 0.8 ohm for a balanced everyday vape, or 0.6 ohm for a looser draw with more vapour. All three are the same price per pack.

This pack of three Geekvape pods costs £6.99, or about £2.33 per pod. With the 4-pack deal at £22, the price drops to around £1.83 per pod, which is great value.

No, the pods come empty, so you will need to fill them with your own e-liquid. This lets you choose any nic salt or 50/50 flavour you enjoy, at the strength you prefer.

You May Like